Phoenix Contact IB IL AO 4/U/0-10-ECO Handleiding (190 Pagina's)

Handleiding

Je bekijkt pagina 122 van 190

IL SYS INST UM E

122 / 188 Phoenix Contact

6452_en_11

11.5.1.3 Mounting/removing power-level terminals

Observe the following safety notes and warning instructions when working on power-

level terminals.

WARNING: Dangerous contact voltage

Only work on power-level terminals and connectors when the power is

disconnected.

Observe the safety notes and warning instructions provided in the terminal-specific

data sheets.

Mounting When mounting a power-level terminal, proceed as shown in Figure 11-15:

• Snap on the power housing, which is required for mounting the station, perpendicular

to the DIN rail (detail A).

When doing this ensure that all featherkeys and keyways on adjacent terminals are

securely interlocked.

The keyway/featherkey connection links adjacent terminals together and ensures

that potential routing is created safely.

The keyways of an electronics base do not continue on the connector of terminals

for the 24 V DC area. When snapping on a power housing, there must be no 24 V

connector on the left-hand side of the housing. If a connector is present, it will have

to be removed.

Figure 11-15 Mounting a power-level terminal

• Next, attach the required connectors to the housing.

The available connections are described in Section “Connections on a power-level

terminal (Inline)” on page 144.

A

B

Bekijk gratis de handleiding van Phoenix Contact IB IL AO 4/U/0-10-ECO, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.