Phoenix Contact IB IL AO 4/U/0-10-ECO Handleiding (190 Pagina's)

Handleiding

Je bekijkt pagina 121 van 190

Mounting/removing devices

6452_en_11 Phoenix Contact 121 / 188

11.5.1.2 Replacing a fuse

The 24 V DC power and segment terminals are also available in versions with a fuse. If a

fuse is not present or faulty, you must insert or replace it.

WARNING: Observe the following notes when replacing a fuse for the protec-

tion of your health and your system.

1. Use the screwdriver carefully to avoid injury to yourself or other persons.

2. Lift the fuse out at the metal contact. Do not lift the fuse out at the glass part as this

may break it.

3. Carefully lift the fuse out at one side and remove it by hand. Make sure the fuse does

not fall into your system.

When replacing a fuse, proceed as shown in Figure 11-14 on page 121:

• Lift the fuse lever (detail A).

• Insert the screwdriver behind a metal contact of the fuse (detail B).

• Carefully lift out the metal contact of the fuse (detail C).

• Remove the fuse by hand (detail D).

• Insert a new fuse (detail E).

• Push the fuse lever down again until it clicks into place (detail F).

Figure 11-14 Replacing a fuse

A B

C

D

E

F

Bekijk gratis de handleiding van Phoenix Contact IB IL AO 4/U/0-10-ECO, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.