Phoenix Contact IB IL AO 4/U/0-10-ECO Handleiding (190 Pagina's)

Handleiding

Je bekijkt pagina 120 van 190

IL SYS INST UM E

120 / 188 Phoenix Contact

6452_en_11

• Press the snap-on mechanism (detail D1), and remove the electronics base from the

DIN rail by pulling the base straight back (detail D2). If you have not removed the

connector of the adjacent terminal on the left, remove it now in order to protect the

potential routing knife contacts and the featherkeys of the keyway/featherkey con-

nection.

Figure 11-13 Removing a terminal

Replacing a terminal If you want to replace a terminal within the Inline station, follow the removal procedure

described above. Do not snap the connector of the adjacent terminal on the left back on

yet. Insert the base of the new terminal.

When doing this ensure that all featherkeys and keyways on adjacent terminals are

securely interlocked.

Then reconnect all the connectors.

The top connector latching must click into place.

C

B

A

D

A1

A2

D1

D2

D1

Bekijk gratis de handleiding van Phoenix Contact IB IL AO 4/U/0-10-ECO, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.