Phoenix Contact IB IL AO 4/U/0-10-ECO Handleiding (190 Pagina's)

Handleiding

Je bekijkt pagina 105 van 190

Mounting/removing devices

6452_en_11 Phoenix Contact 105 / 188

11 Mounting/removing devices

11.1 Basic information about mounting

Mounting location Modules and terminals of the Inline product range have IP20 protection and are therefore

designed for use in a closed control cabinet or control box (terminal box) with IP54 pro-

tection or higher.

DIN rail Install Inline Block IO modules and Inline terminals on a DIN rail with the following prop-

erties.

– 35 mm standard DIN rail (see “General accessories” on page 162)

– DIN rail height: 7.5 mm

– Mounted on a level surface

If these requirements are met, the module or terminal rests on the mounting surface.

Figure 11-1 Level surface with a DIN rail height of 7.5 mm

The distance between DIN rail fasteners must not exceed 200 mm. This distance is nec-

essary for the stability of the rail when mounting and removing devices.

Figure 11-2 Fixing the DIN rail (dimension in mm)

7.5

200

Bekijk gratis de handleiding van Phoenix Contact IB IL AO 4/U/0-10-ECO, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.