Phoenix Contact CSS 1.5-1/3-EMC Handleiding (152 Pagina's)

Handleiding

Description of parameter settings

109908_en_02 Phoenix Contact 87 / 150

10.5.10 Analog input

As of version 1.03, this setting is only visible in the options menu of the

CONTACTRON Speed Starter when the analog input is activated, see

“PTC/AI, thermal contact, and thermistor relay” on page 85.

The CONTACTRON Speed Starter has an input for analog signals (0 V ... 10 V,

4 mA ... 20 mA) so that the speed can be controlled variably within the parameterized

range. When the analog input is enabled, it has priority over all other speed settings.

10.5.11 Lowest output frequency

As of version 1.03, this setting is only visible in the options menu of the

CONTACTRON Speed Starter when the analog input is activated, see “PTC/AI,

thermal contact, and thermistor relay” on page 85.

Can be set

during operation

Clear text display Parameter name Setting range Default

setting

 10. cv - AI input mode Analog input circuit volt: voltage range 0 V ... 10 V

curr: current range 4 mA ... 20 mA

Volt

Can be set

during

operation

Clear text display Parameter name Setting range Default

setting

- 11. LF - lowest output

frequency

Lowest output frequency 0.0 Hz ... set maximum frequency 0.0 Hz

Bekijk gratis de handleiding van Phoenix Contact CSS 1.5-1/3-EMC, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.