Phoenix Contact CSS 1.5-1/3-EMC handleiding
Handleiding
Je bekijkt pagina 73 van 152
Control panel
109908_en_02 Phoenix Contact 73 / 150
Follow these steps to set OPTIONS:
1. Turn the rotary switch to “OPTIONS”.
2. Use <UP> or <DOWN> to select the options/parameters to be changed.
3. Use <SET/RESET> for setting.
The stored value of the chosen parameter is shown on the display.
4. Press <UP> or <DOWN> to change the setting value. The changed value starts to
flash.
5. Press the <SET/RESET> button to store the value. The stored value is shown on the
display for 2 s (without flashing), then the display returns to the parameter name.
6. Use <UP> or <DOWN> to select other parameters to be changed.
7. If you select a parameter without making a setting, the value of this parameter shows
on the display for 10 s. The display then returns to the parameter name.
Bekijk gratis de handleiding van Phoenix Contact CSS 1.5-1/3-EMC, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Phoenix Contact |
| Model | CSS 1.5-1/3-EMC |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 11973 MB |
