Phoenix Contact CSS 1.5-1/3-EMC Handleiding (152 Pagina's)

Handleiding

Error codes

109908_en_02 Phoenix Contact 103 / 150

ID Display on the control

panel

Error name Error descriptions

21 V-W - Short circuit V-W Phase short circuit VW

(V-W)

A short circuit is detected between the V and W output

terminals before the motor starts.

Reset

Reset method Manual reset

Cause Remedial measures

Short circuit of motor wiring Check the motor wiring for short circuit.

ID Display on the control panel Error name Error descriptions

22 OPL - Output phase loss Output phase loss (OPL) Output phase loss

Reset

Reset method Manual reset

Cause Remedial measures

Three-phase impedance of motor unbalanced Replace the motor.

The motor is wired incorrectly. Check the wire connection between the

CONTACTRON Speed Starter output terminal and motor.

ID Display on the control panel Error name Error descriptions

23 cf3 - Error-hardware check Hardware check (CF3) A failure has been detected on the

CONTACTRON Speed Starter’s control board.

Reset

Reset method None

Cause Remedial measures

Hardware failure Return the CONTACTRON Speed Starter to the manufacturer for repair.

ID Display on the control panel Error name Error descriptions

24 cf2 - Error-firmware check EEPROM read error (CF2) Internal EEPROM cannot be read.

Reset

Reset method Manual reset

Cause Remedial measures

Internal EEPROM cannot be read If the failure still exists after a reset, return the

CONTACTRON Speed Starter to the manufacturer for repair.

Bekijk gratis de handleiding van Phoenix Contact CSS 1.5-1/3-EMC, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.