Phoenix Contact CSS 0.37-1/3-EMC handleiding
Handleiding
Je bekijkt pagina 67 van 152
Control panel
109908_en_02 Phoenix Contact 67 / 150
9.2.5 Rotary switch in “SPEED1”/“SPEED2” position when
RUNNING
The display shows the stored frequency and the LED “Hz” is on. Depending on the stored
direction, the LED “R” or “L” is also on.
The default standard value is 50.0 Hz.
“SP1” appears for 1 s every 4 s.
The direction cannot be changed if a control signal is present.
For a lower speed, press <DOWN>. For a higher speed, press <UP>.
The value in the display changes (steps of 0.1) and starts to flash.
Press <SET/RESET> to store the value.
The displayed value stops flashing and is stored.
Bekijk gratis de handleiding van Phoenix Contact CSS 0.37-1/3-EMC, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Phoenix Contact |
| Model | CSS 0.37-1/3-EMC |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 11973 MB |
