Phoenix Contact CHARX SEC-3050 Handleiding (178 Pagina's)

Handleiding

CHARX control modular

24 / 176 Phoenix Contact

109999_en_06

4 Meter 1 12 V Power supply, +12 V

2 GND Power supply, ground

3 A+ RS-485, connection for energy measuring device

4 B-

5 RxD Reserved for future applications

6 TxD

5 RCM 1 12 V Power supply for residual current sensor

2 GND

3 ER1 Trigger signal for residual current detection,

Active High (0 V = no error)

Internal

pull-up to

12 V

4 ER2 Trigger signal for residual current detection,

12 V Active Low (12 V = no error)

5 TST Test and reset signal of residual current sensor (+12 V)

6 NC Signal is not connected

6 Socket 1 CP Control pilot in accordance with IEC 61851-1, Annex A

2 PP Proximity (proximity detection in accordance with

IEC 61851-1, Annex B)

3 LO- Control of connector locking mechanism, ±12 V

4 LO+

5 LD1 Feedback signal for locking

6 LD2

7 Contactor C1 Mains input voltage for controlling the charging contactor

(floating switch contact)

CHARX SEC-

1000

only

C2

NC (2x) Not connected

8 Contactor C1 / L Mains input voltage for controlling the charging contactor

(floating switch contact) and zero cross detection during

communication in accordance with ISO/IEC 15118, to be

connected to the supply network phase

CHARX SEC-

3xxx

only

C2 / L* Switching output for controlling the charging contactor

N (2x) Neutral conductor for zero cross detection during commu-

nication in accordance with ISO/IEC 15118

Table 2-2 Connections and operating elements on the charging controller

No. Connection

group

Pos. Designa-

tion

Description Note

Bekijk gratis de handleiding van Phoenix Contact CHARX SEC-3050, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.