Phoenix Contact AS-WORKBENCH-F 90 MA handleiding
Handleiding
Je bekijkt pagina 26 van 52
clipx WIRE assist
26 / 50 Phoenix Contact
109435_en_02
2.5 Synchronizing the lifting axes
Proceed as follows to synchronize both lifting axes.
During synchronization, the system is lowered by 5 mm and raised again. Never re-
lease the down button during the synchronization. If you release the button too early,
synchronization will be interrupted. When synchronization is aborted, you cannot
move the bench up. Restart synchronization.
Figure 2-11 Synchronization
A Press and hold the down button until the limit position is reached.
B Release button for 2 seconds.
C Press and hold down the down button again for 8 seconds.
D Move the workbench to the highest position.
A
B
C
D
max
8 s
2 s
max
Bekijk gratis de handleiding van Phoenix Contact AS-WORKBENCH-F 90 MA, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Phoenix Contact |
| Model | AS-WORKBENCH-F 90 MA |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5597 MB |
