Philips PureProtect Pro AC4228 handleiding

Luchtreiniger

Philips

51 pagina's

PDF beschikbaar

Handleiding

English

Room size is large or the outdoor air quality is poor.

For optimum purification performance, please close the

doors and windows when operating the air purifier.

There are indoor pollution resources. For instances, smoking,

cooking, incense.

Filters reach the end of life. Replace the filters with a new

ones.

The appliance produces a strange smell. The first few times you use the appliance, it may produce a

plastic smell. This is normal. However, if the appliance

produces a burnt smell even if removing the filter, contact

your Philips dealer or an authorized Philips service center. The

filter may produce smell after being used for a while because

of the absorption of indoor gases. It's recommended that you

put the filter in a well-ventilated place for a couple of hours

to reduce the smell.

The appliance is extra loud. It's normal if the appliance runs at the Turbo mode.

In Auto mode, the appliance will run in higher speed when

the air quality is poor.When using the appliance in a

bedroom at night, choose the Sleep mode.

If there is abnormal sound, contact the Consumer Care

Center in your country.

Formaldehyde reading suddenly rises

sharply.

Please check whether there is a new source of formaldehyde

pollution nearby.

Please check whether there are any substances around the

device that are interfering with the AeraSense sensing

system, such as cooking fumes or an air freshener.

The formaldehyde reading fails to reach the

minimum range after a long time.

The room is too large or concentration of formaldehyde is

too high, exceeding the purifying capacity of the device.

Please make sure that the room size is within the

recommended surface area.

A certain type of interfering gas exists around the device for a

prolonged time and cannot be eliminated by the device.

Please open window(s) for ventilation and remove the source

of interference.

The appliance still indicates that I need to

replace filters, but I already did.

Perhaps you did not reset the filter lifetime counter. Switch

on the appliance. Then touch and hold the and

simultaneously for 3 seconds.

Error code “E1”displays on the screen. The motor has malfunctions. Contact the Consumer Care

Center in your country.

The Wi-Fi setup is not successful. Please ensure your smart phone is connected to a 2.4GHz

(home) Wi-Fi netwok instead of a 5GHz Wi-Fi network or

public Wi-Fi. For a successful pairing, we suggest turning off

your mobile data before initiating the pairing process.

Bekijk gratis de handleiding van Philips PureProtect Pro AC4228, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.