Philips L'Or Barista LM9512 handleiding
Handleiding
Je bekijkt pagina 22 van 219
23
English
1.5 L
13 When the flushing cycle has finished, the Ristretto and Lungo button flash a
few times.
Note: It is normal that some water remains behind in the water tank after the
descaling procedure.
The machine switches off. The descaling procedure is finished.
Energy efficiency
Energy efficiency Value
Standby mode power consumption n/a
Off mode power consumption 0,2 W
Networked standby mode power consumption n/a
Period before automatic switching into standby
mode
0 Min
Measurement standard EN 50564:2011
Meaning of light signals
-
The selected coffee button flashes slowly: the machine is preparing your
coffee.
-
The selected coffee button flashes quickly: the water tank is empty, fill the
water tank with tap water.
-
The Ristretto and Lungo button flash simultaneously after brewing coffee:
you need to descale the machine.
-
All three coffee buttons flash simultaneously: the machine needs to cool
down. Wait about two minutes before you start brewing a new coffee.
Troubleshooting
This chapter summarizes the most common problems you could encounter with
your machine. If you are unable to solve the problem with the information
below, visit www.lorbarista.com/support for a list of frequently asked questions
or contact the Consumer Care Center in your country.
Problem Possible cause Solution
The machine does not switch
on.
The machine is not connected to the
mains.
Put the plug in an earthed wall
socket.
Bekijk gratis de handleiding van Philips L'Or Barista LM9512, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Philips |
| Model | L'Or Barista LM9512 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 19285 MB |
