Philips Evnia 32M2C3200WL handleiding

35 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 30 van 35
28
10. Troubleshooting &
FAQs
10�1 Troubleshooting
This page deals with problems that can be
corrected by a user. If the problem persists
after you have tried these solutions,
contact a Philips customer service
representative.
1
Common Problems
No Picture (Power LED not lit)
Make sure the power cord is
plugged into the power outlet and
the back of the monitor
First, ensure that the power button
on the rear of the monitor is in the
OFF position, then press it to the ON
position�
No Picture (Power LED is White)
Make sure the computer is turned
on�
Make sure the signal cable is
properly connected to your
computer
Make sure the monitor cable has no
bent pins on the connecting side� If
yes, repair or replace the cable�
The Energy Saving feature may be
activated Screen says
  
Make sure the monitor cable
is properly connected to your
computer� (Also refer to the Quick
Start Guide)�
Check to see if the monitor cable has
bent pins�
Make sure the computer is turned
on�
The AUTO button doesn't function
The auto function is applicable only
in VGA-Analog mode� If the result
is not satisfactory, you can make
manual adjustments via the OSD
menu�
Note
The Auto Function is not applicable in
DVI-Digital mode as it is not necessary
Visible signs of smoke or sparks
Do not perform any troubleshooting
steps
Disconnect the monitor from the
mains power source immediately for
safety
Contact Philips customer service
representative immediately
2
Imaging Problems
Image is not centered
Adjust the image position using
the Auto” function in OSD Main
Controls�
Adjust the image position using
the Phase/Clock of Setup in OSD
Main Controls� It is valid only in VGA
mode�
Image vibrates on the screen
Check that the signal cable is
properly securely connected to the
graphics board or PC�
Verticalickerappears
Adjust the image using the Auto”
function in OSD Main Controls�
Eliminate the vertical bars using
the Phase/Clock of Setup in OSD
Main Controls� It is valid only in VGA
mode�

Bekijk gratis de handleiding van Philips Evnia 32M2C3200WL, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkPhilips
ModelEvnia 32M2C3200WL
CategorieMonitor
TaalNederlands
Grootte3715 MB