Philips Evnia 27M2N5500P handleiding
Handleiding
Je bekijkt pagina 15 van 36
13
Note
The black strip located on the top and
the bottom of the screen is for measuring
the correct aspect ratio when in the PBP
mode. If you expect to see full-screen,
adjust your device's resolutions to pop-
up attention resolution and you will able
to see 2 devices' source screen project
to this display without black strips. It is
important to note that the analog signal
is not supported on full screen in PBP
mode.
• PIP / PBP Input: There are different
video inputs to choose from as the
sub-display source: [HDMI 1], [HDMI
2], [DP].
Please refer to the table below for
compatibility of the main/sub-input
source.
SUB SOURCE POSSIBILITY (xl)
Inputs
HDMI 1 HDMI 2
DisplayPort
MAIN
SOURCE
(xl)
HDMI 1
● ● ●
HDMI 2
● ● ●
DisplayPort
● ● ●
• PIP Size: When PIP is activated, there
are three sub-window sizes to choose
from [Small], [Middle], and [Large].
B
A (main)
Small
Middle
Large
• PIP Position: When PIP is activated,
there are four sub-window positions
to choose from.
Top-Left Top-Right
B
A (main)
B
A (main)
Bottom-Left Bottom-Right
B
A
(main)
A (main)
B
• Swap: The main picture source and
the sub-picture source are
swapped on the display.
Swap A and B source in [PIP] mode:
B
A (main)
↔
B (main)
A
Swap A and B source in [PBP] mode:
A (main) B
↔
B (main) A
• Off: Stop MultiView function.
A (main)
Note
When you activate the SWAP function,
the video and its audio source will swap
at the same time.
Bekijk gratis de handleiding van Philips Evnia 27M2N5500P, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Philips |
| Model | Evnia 27M2N5500P |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4279 MB |
