Handleiding
Je bekijkt pagina 12 van 33
10
To enable the OverClock feature, you
will need to go to OSD menu > Game
Settings > OverClock.
Input Audio Language System Setup Close
SmartImage
Resolution
2560X1440 60Hz
DP
On Standard
Refresh Rate Input Source Adaptive Sync SmartImage
Select
Game Mode
OK
Close
Overclock
Smart MBR Sync
Crosshair
Stark ShadowBoost
Smart Sniper
Low Input Lag
SmartResponse
On
Off
Note
Please note that the default setting
for OverClock is o as it can cause
irreversible damage to your monitor.
If the screen is displayed abnormally
after rebooting, please switch o
the OverClock setting located in the
monitor's OSD menu. Alternatively, you
can unplug the power cable. Then, press
and hold the left button of the menu
toggle on the monitor while plugging
the power cable back in. Keep holding
the button until the screen turns on.
This will turn o the Overclock function,
and the monitor will return to its default
refresh rate.
5
Physical Function
Tilt
20°
-5°
Swivel
-30°
+30°
Height adjustment
130mm
Pivot
90°-90°
0°0°
3
3
Warning
• To avoid potential screen damage,
such as panel peeling, ensure that
the monitor does not tilt downward
by more than -5 degrees.
• Do not press the screen while
adjusting the angle of the monitor.
Grasp only the bezel.
Bekijk gratis de handleiding van Philips Evnia 27M2N3501PA, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Philips |
| Model | Evnia 27M2N3501PA |
| Categorie | Monitor |
| Taal | Nederlands |
| Grootte | 3775 MB |
