Philips 7300 series 50PUG7300 handleiding

Televisie

Philips

67 pagina's

PDF beschikbaar

Handleiding

• Redo the installation and select Digital and Analog

Channels during the installation.

Some channels disappeared, cannot find all or some

previously installed channels

• Check if you selected the correct Channel

list or Favorites list you normally use.

• Some channels might be moved or even deleted by

the broadcaster. In the normal channels list, search for

the channel you are missing. If the channel is still

available, you can put it back in the favorites list.

20.5. Picture

No picture/distorted picture

• Check if the TV is connected with an antenna or is

using a provider signal. Check the cable connections.

• Check if the correct source/input is selected in the

Sources menu. Press  Sources and select the

source/input you need.

• Check if the external device or source is properly

connected.

• Check if the reception is poor.

• Check if the picture is set to a minimal value.

Select Picture style, select a style and press OK.

• To check if the TV is broken, try to play a video clip.

Press  Quick Menu > Help > TV diagnose > Check the

TV. If the video clip stays black, call Philips. Wait until

the clip ends and select Contact info in the Help menu.

Call the telephone number for your country.

Sound but no picture

• Change to other video sources and then change back

to current source.

• Select Picture style, select a style, and press OK.

• To restore Picture style to its original setting, go

to (Home) > Settings > Picture, then select Restore

picture style.

• Reset all TV settings; go to (Home) > Settings

> General settings > Reinstall TV.

• Check the connections of the source/input devices.

Poor reception

If the TV picture is distorted or variable in quality, the

input signal might be poor. A weak digital signal is seen

as a picture that is breaking up in square blocks and

freezes occasionally. Much sooner than a bad analog

signal, a bad digital signal will fall away.

• Check if the antenna cable is properly connected.

• Large loudspeakers, ungrounded audio devices, neon

lights, high buildings and other large objects can

influence reception quality when you are using an

antenna. Try to improve the reception by changing the

antenna direction or moving devices away from the

TV. Bad weather might deteriorate the reception.

• Check if all connections, to and from your devices, are

properly connected.

• If reception on only one channel is poor, fine-tune the

channel with Analog: manual installation. (Only for

analog channels)

• Check if the incoming digital signal is sufficiently

strong. While watching a digital channel, press

OPTIONS and select Status and press OK. Check

the Signal strength and Signal quality.

Poor picture from a device

• Make sure that the device is connected properly.

Make sure that the device's output video setting is the

highest possible resolution, if applicable.

• Restore picture style or change to another picture

style.

Picture settings change after a while

Make sure that Location is set to Home. You can

change and save settings in this mode.

 (Home) > Settings > General settings > Location

A banner appears

If an on-screen promotion banner appears occasionally

or the Picture style automatically switches back to Vivid

at startup, the TV is in Shop location. Set the TV to

Home location for use at home.

 (Home) > Settings > General settings > Location

Picture does not fit the screen / Wrong or unstable

picture size / Picture position is incorrect

• If the picture size - its aspect ratio - does not fit the

screen, with black bars on the top and bottom or left

and right side of the screen, press (Home) >

Settings > Picture > Picture Format > Fill screen.

• If the picture size changes all the

time, press (Home) > Settings > Picture > Picture

Format > Fit to screen.

• If the position of the picture is incorrect on the screen,

try to check the signal resolution and output type of the

connected device; press (Home) > Settings > Picture >

Picture Format > Original.

Computer picture is not stable

Make sure that your PC uses the supported resolution

and refresh rate.

20.6. Sound

No sound or poor sound quality

• Check if the sound settings of the TV are OK; press

the  volume or  mute key.

• If you use a digital receiver (set-top box), check if the

volume on this receiver is not set to zero or mute.

• Check if the TV - the audio signal - is properly

connected with the Home Theater System, if you use

such a system for the TV sound. Check if you connected

Bekijk gratis de handleiding van Philips 7300 series 50PUG7300, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.