Philips 7300 series 50PUG7300 handleiding

Televisie

Philips

67 pagina's

PDF beschikbaar

Handleiding

17. Software

17.1. Update Software

Search for Updates

Update from Internet

 (Home) > Settings > Update software > Search for

updates > Internet (Recommended)

Look for a software update yourself.

• If the TV is connected to the Internet, you may receive

a message to update the TV software. You need a high-

speed (broadband) Internet connection. If you receive

this message, we recommend you to carry out the

update.

• During the software update, there is no picture and

the TV will switch off and on again. This might happen

several times. The update can take a few minutes.

• Wait until the TV picture comes back on. Do not press

the power switch  on the TV or on the remote control

during the software update.

Update from USB

 (Home) > Settings > Update software > Search for

updates > USB

• You need a computer with a high-speed Internet

connection and a USB memory device to upload the

software on the TV.

• Use a USB memory device with 750MB of free space.

Make sure that write protection is switched off.

1 - Start the update on TV

Select Update software > Search for updates > USB,

then press OK.

2 - Identify the TV

Insert the USB memory into one of the USB connections

of the TV.

Select Start and press OK. An identification file is

written on the USB memory device.

3 - Download the TV software

- Insert the USB memory into your computer.

- On the USB memory device, locate the

file update.html and double-click it.

- Click on Send ID.

- If new software is available, download the .zip file.

- After the download, unzip the file and copy the

file autorun.upg onto the USB memory device.

- Do not place this file in a folder.

4 - Update the TV software

Insert the USB memory into the TV again. The update

starts automatically.

The TV switches itself off for 10 seconds, and then back

on again. Please wait.

Do not . . .

• use the remote control

• remove the USB memory device from the TV

• press  twice

• press the power switch on the TV

The TV switches itself off (for 10 seconds) and then back

on again. Please wait.

The TV software has been updated. You can use the TV

again.

To prevent an accidental update of the TV software,

delete the autorun.upg file from the USB memory

device.

Local Updates

 (Home) > Settings > Update software > Search for

updates > USB > Local updates.

For dealers and expert users.

17.2. Software Version

 (Home) > Settings > Update software > Current

software info

To view the current TV software version.

17.3. Automatic Software

Update

 (Home) > Settings > Update software > Automatic

software update

To switch on Automatic software update to update

your TV software automatically. Leave the TV on

standby.

When the setting is enabled, the upgrade gets

downloaded when the TV is powered ON and installed

15 minutes after the TV enters standby (as long as there

is no alarm scheduled).

When the setting is disabled, the "Upgrade

Now"/"Later" OSD is shown.

Bekijk gratis de handleiding van Philips 7300 series 50PUG7300, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.