Philips 5000 Series 24B2G5200 handleiding

Monitor

Philips

35 pagina's

PDF beschikbaar

Handleiding

4. PowerSensor™

How does it work?

• PowerSensor works on principle

of transmission and reception of

harmless “infrared” signals in order to

detect user-presence.

• When the user is in front of the

monitor, the monitor operates

normally, at the predetermined

settings that the user has set- i.e.

brightness, contrast, color, etc

• Assuming that the monitor was set

to 100% of brightness for example,

when the user leaves his seat and is

no longer in front of the monitor, the

monitor automatically reduces the

power consumption upto 80%.

User present in front User not present

ttaW

Power consumption as illustrated above is for reference purpose only

Setting

Default settings

PowerSensor is designed to detect the

presence of the user located between 30

and 100 cm (12 and 40 inches) from the

display and within ve degrees left or

right of the monitor.

Custom settings

If you prefer to be in a position outside

the perimeters listed above, choose

a higher strength signal for optimal

detection eciency: The higher the

setting, the stronger the detection signal.

For maximum PowerSensor eciency and

proper detection, please position yourself

directly in front of your monitor.

• If you choose to position yourself

more than 100 cm or 40 inches

from the monitor use the maximum

detection signal for distances up to

120 cm or 47 inches. (Setting 4)

• Since some dark colored clothing

tends to absorb infrared signals even

when the user is within 100 cm or 40

inches of the display, step up signal

strength when wearing black or

other dark clothes.

Hot key

Sensor distance

Oﬀ

Input

Picture

Color

PowerSensor

LightSensor

Audio

Landscape/Portrait mode

ATTENTION

PowerSensor off

ATTENTION

PowerSensor off

Above illustrations are for reference purpose only, may not

reect the exact display of this model.

How to adjust settings?

If PowerSensor is not operating correctly

inside or outside the default range,

here’s how to ne-tune detection:

• Press the PowerSensor hot key.

• You will find the adjustment bar.

• Adjust the PowerSensor detection

adjustment to Setting 4 and press OK.

• Test the new setup to see if

PowerSensor properly detects you in

your current position.

• PowerSensor function is designed to

work in Landscape mode (horizontal

position) only. After PowerSensor

turn on it, it will automatically turn

Off if the monitor is used in Portrait

mode (90 degree/vertical position); it

will automatically turn ON if monitor

is returned to its default Landscape

position.

Bekijk gratis de handleiding van Philips 5000 Series 24B2G5200, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.