Handleiding
Je bekijkt pagina 9 van 80
control > Update remote control software
Check available remote control software for updates.
3.3. IR sensor
The TV can receive commands from a remote control
that uses IR (infrared) to send commands. If you use
such a remote control, always make sure you point the
remote control at the infrared sensor on the front of
the TV.
Warning
Do not put any objects in front of IR sensor of the TV, it
may block the IR signal.
3.4. Batteries and Cleaning
Replace batteries
Refer to the Quick Start Guide in your product package
for detailed information about the remote control
batteries.
If the TV does not react on a key press on the remote
control, the batteries might be empty.
To replace the batteries, open the battery compartment
on the back of the remote control.
1 - Slide the battery door in the direction shown by the
arrow.
2 - Replace the old batteries with new batteries. Make
sure the + and the - ends of the batteries line up
correctly.
3 - Reposition the battery door and slide it back until it
clicks.
• Remove the batteries if you are not using the remote
control for a long time.
• Safely dispose of your old batteries according to the
end of use directions.
• Check the condition of the remote control batteries
regularly to prevent corrosion of the contacts.
For more information, check on Help > User manual >
End of use.
Cleaning
Your remote control is treated with a scratch-resistant
coating.
To clean the remote control, use a soft damp cloth.
Never use substances such as alcohol, chemicals or
household cleaners on the remote control.
Never expose the remote control to water or liquids.
3.5. Simple Setup App for Set
Top Box
Simple Setup app will allow user to control their set top
box using the TV remote control (via IR control to the
set top box).
Setup via App for connected set top box
1 - Connect a set top box via HDMI to TV.
2 - Launch Simple Setup app on TV
3 - To setup for a new set top box, select the brand and
model for your set top box.
Simple Setup app on TV will send set top box IR code
database via Bluetooth® to TV remote control.
Control of set top box using TV remote control
1 - When user is watching TV source, TV remote control
will be in TV mode and sending TV IR codes.
2 - When Simple Setup app is running on TV, it will
detect when user switch to HDMI input for set top box
and trigger TV remote control to switch to send set top
box IR codes during key press.
9
Bekijk gratis de handleiding van Philips 43PUS8560, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Philips |
| Model | 43PUS8560 |
| Categorie | Televisie |
| Taal | Nederlands |
| Grootte | 8816 MB |
