Handleiding
Je bekijkt pagina 15 van 51
7. Channels
7.1. About Channels and
Switch Channels
To watch TV channels
- Press . The TV tunes to the TV channel you last
watched.
- Press (Home) > Channels and press OK.
- Press + or - to switch channels.
- If you know the channel number, type in the number
with the number keys. Press OK after you entered the
number to switch channels.
- To switch back to the previously tuned channel,
press BACK.
To switch to a channel from a channel list
- While watching a TV channel, press LIST to open
the channel lists.
- The channel list can have several pages with channels.
To view the next or previous page, press + or -.
- To close the channel lists without switching channels,
press LIST again.
Channel icons
After an Automatic channel update of the channel list,
newly found channels are marked with a (star).
If you lock a channel, it will be marked with a (lock).
Radio channels
If digital broadcasting is available, digital radio stations
are installed during installation. Switch to a radio
channel just like you switch to a TV channel.
This TV can receive digital television standard DVB. TV
may not work properly with some operators of digital
television , non-compliance with requirements of the
standard in full.
7.2. Install Channel
Antenna and Cable
Manually Search for Channels and Channel Settings
Search for Channels
Update existing channel list
(Home) > Settings > Antenna/cable
installlation > Search for channels > Update channels
Re-install all channels
(Home) > Settings > Antenna/cable
installlation > Search for channels > Re-install channels
1. Select the country where you are now and press OK.
2. Select Antenna (DVB-T) or Cable (DVB-C), and select
one item you need to re-install.
3. Select Digital and analogue channels, Only digital
channels, or Only analogue channels.
4. Select Start and press OK to update channels. This
can take a few minutes.
Channel Settings
(Home) > Settings > Antenna/cable
installlation > Search for channels > Re-install channels
1. Select the country where you are now and press OK.
2. Select Antenna (DVB-T) or Cable (DVB-C), and select
one item you need to re-install.
3. Select Digital and analogue channels, Only digital
channels, or Only analogue channels.
4. Select Settings and press OK.
5. Press (red) to reset, or press (green) when
complete the settings.
Frequency scan
Select the method of searching for channels.
- Quick: select the faster method and use the
predefined settings used by most cable providers in
your country.
- Full: If this results in having no channels installed or if
some channels are missing, you can select the
extended Full method. This method will take more time
to search for and install channels.
- Advanced: If you received a specific network
frequency value to search for channels, select
Advanced.
Network frequency mode
If you intend to use the fast Quick method in Frequency
scan to search for channels, select Automatic. The TV
will use 1 of the predefined network frequencies (or HC
- homing channel) as used by most cable providers in
your country.
If you received a specific network frequency value to
search for channels, select Manual.
Network frequency
With the Network frequency mode set to Manual, you
can enter the network frequency value received from
your cable provider here. To enter the value, use the
number keys.
Symbol rate mode
If your cable provider did not give you a specific symbol
rate value to install the TV channels, leave the Symbol
rate mode setting on Automatic.
If you received a specific symbol rate value,
select Manual.
15
Bekijk gratis de handleiding van Philips 43PFS5500, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Philips |
| Model | 43PFS5500 |
| Categorie | Televisie |
| Taal | Nederlands |
| Grootte | 5435 MB |
