Handleiding
Je bekijkt pagina 24 van 29
22 EN
9
Troubleshooting
This section covers common problems and
their accompanying solutions.
General issues
The TV cannot be switched on:
• Disconnect the power cable from the
power outlet. Wait for one minute
before reconnecting it.
• Check that the power cable is
securely connected.
The remote control is not working
properly:
• Check that the remote control
batteries are correctly inserted
according to the +/- orientation.
• Replace the remote control batteries
if they are at or weak.
• Clean the remote control and TV
sensor lens.
The standby light on the TV is red and
blinking:
• Disconnect the power cable from
the power outlet. Wait for the TV to
cool down before reconnecting the
power cable. If the light continues
to blink, please contact Philips
Customer Care Centre.
You forgot the code to unlock the TV
lock feature
• Enter ‘8888’.
The TV menu is in the wrong language.
• Change the TV menu to your
preferred language.
When turning the TV On/O or to
Standby, you hear a creaking sound
from the TV chassis:
• No action is required. The creaking
sound comes from the normal
expansion and contraction of the TV
as it cools down and warms up. This
does not impact its performance.
Channel issues
Previously installed channels do not
appear in the channel list:
• Check that the correct channel list is
selected.
Picture issues
The TV is on, but there is no picture:
• Check that the antenna is properly
connected to the TV.
• Check that the correct device is
selected as the TV source.
There is sound but no picture:
• Check that the picture settings are
correctly set.
Poor TV reception from the antenna
connection:
• Check that the antenna is properly
connected to the TV.
• Loudspeakers, unearthed audio
devices, neon lights, high buildings
and other large objects can inuence
reception quality. If possible, try to
improve the reception quality by
changing the antenna direction or
moving devices away from the TV.
• If the reception on one particular
channel is poor, please ne tune this
channel.
There is poor picture quality from
connected devices:
• Check that the devices are connected
properly.
• Check that the picture settings are
correctly set.
The TV did not save your picture
settings:
• Check that the TV location is set to
the home setting. This mode oers
you the exibility to change and save
settings.
The picture does not t the screen; it is
too big or too small:
Bekijk gratis de handleiding van Philips 40PFT5708, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Philips |
| Model | 40PFT5708 |
| Categorie | Televisie |
| Taal | Nederlands |
| Grootte | 2821 MB |
