Philips 3000 Series 32BDL3751T Handleiding (83 Pagina's)

Handleiding

32BDL3751T

75

How to setup the settings in the menu to

control all the monitors at the same time

and individually via RC?

Daisy chained by RS232 and no IR cable 1. The rst display sets as “Primary” on

OSD (Advanced option/IR control item),

others set as “Secondary”.

2. The setup OSD will show on top left

side of the display.(Toggle MENU will

show again if it disappear)

3. Default setting: ID NO: 0, GP NO: 0, this

setting can control all displays by IR.

The “+”, “-” can change “ID NO” to

control signal display by “Monitor ID”.

The “UP”, “DOWN” can change “GP NO”

to control multi-display by “Group ID”.

*The rst display is always controlled by

IR.

How is the RC working? Daisy chain: no connection of RS232 and

IR cable

No setting is required. Connect with IR

cables and control by IR.

*This may cause out-of-synchronizm

phenomenon. It is suggested to use the

above settings with RS-232 cable.

Bekijk gratis de handleiding van Philips 3000 Series 32BDL3751T, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.