Philips 3000 Series 32BDL3751T handleiding

Monitor

Philips

83 pagina's

PDF beschikbaar

Handleiding

32BDL3751T

Setup Wi-Fi hotspot information

Hotspot name : It is the SSID and must comply with the IEEE

802.11 specication. It is recommended to use 0-32 octets

with UTF-8 encoding.

Security : System provide NONE and WPA2 PSK security

protocol to provide hotspot network. Suggest using WPA2

PSK which more secure than NONE.

Hotspot password : It is randomly generated for other clients

to connect by default. The user can also set a new password

manually.

Turn o hotspot automatically

When enabled, this feature will automatically deactivate

the hotspot if no devices are connected to it for a specied

period of time. This prevents the hotspot from staying on

unnecessarily when it's not in use.

Disable Tethering

By default, devices can use mobile data to access network

via a hotspot. If enabling the option, the system will block

devices from network access by hotspot.

7.2. Connected Devices

Show the devices connected via Bluetooth.

7.3. Signage Display

Settings -> Signage Display, to setup most features of signage

display. Descript in below sessions.

7.3.1. General Settings

Settings -> Signage Display -> General Settings

Set up Signage Display name, User logo and Screenshot,

Floating menu and Gestures.

Signage Display Name

Settings -> Signage Display -> General Settings -> Signage

Display Name

Set up PD name, default name Ethernet MAC address with

prex “PD_”. For example, “PD_000b12223398”. The max

length of name is 36 chars in UTF8 format. Click to rename it.

Boot Logo

Set up personal boot animation to show when system

powers on. User can set up device boot up logo (boot

animation) when OSD Menu -> Conguration 2 -> Logo is set

to “User” mode

If the Logo is not set to “User” mode, the user will not be able

to select a custom boot animation.

When set to “User” mode, the “Choose Boot Animation”

becomes available.

When Logo is set to User mode, the system will disable the

default Philips logo and replace it with the user selected

boot animation le. If user does not set a boot animation

le for User mode, the default Philips boot animation will be

displayed during boot time.

Click “Choose Boot Animation” to pop up a dialog for

the user to select a boot animation le. The system will

automatically scan the les under the USB storage.

The boot animation le name must be set to “bootanimation.

zip”, any other name is invalid.

All available boot animation les can be found in the

following folder:

1. File under /data/local/bootanimation/:

The boot animation le that was copied from USB.

2. File under {USB_STORAGE_VOLUME_NAME}/:

The boot animation le saved on the USB storage.

Bekijk gratis de handleiding van Philips 3000 Series 32BDL3751T, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.