Philips 3000 Series 32BDL3751T Handleiding (83 Pagina's)

Handleiding

32BDL3751T

19

Press the [ID] button and the red LED blinks twice.

1. Press [ID SET] button for more than 1 second to enter the

ID Mode. The red LED lights up.

Press the [ID SET] button again will exit the ID Mode. The

red LED lights o.

Press the digit numbers [0] ~ [9] to select the display to be

controlled.

For example: press [0] and [1] for display No.1, press [1] and [1]

for display No.11.

The numbers available are [01] ~ [255].

2. If no button is pressed within 10 seconds, it will exit from

the ID mode.

3. If a wrong button is pressed, wait for 1 second until the

red LED lights o and then turns on again, then press the

correct digits.

4. Press [ENTER] button to conrm your selection. The red

LED blinks twice and then lights o.

NOTE:

• Press [NORMAL] button. The green LED blinks twice,

indicating that the display is under normal operation.

• It is necessary to set up the ID number for each display

before selecting its ID number.

3.6.2. ID Remote Control

Set remote control ID number when using several displays.

Bekijk gratis de handleiding van Philips 3000 Series 32BDL3751T, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.