Handleiding
Je bekijkt pagina 8 van 46
6
3
Connecting to your PC
OR
a
d
b C
USB Type-C
USB C-C
a-1
a-2
Fast Charger
USB-A
RJ45
USB hub (USB A-C)
USB Type-A
a-1
a-2
OR
a
d
b C
USB Type-A
USB Type-A
HDMI
1
2 3 3 4 5 6 7 8
109
1
AC/DC power input
2
HDMI input
3
Thunderbolt
TM
4 input /
Thunderbolt
TM
4 output
• Thunderbolt
TM
4 input : Video
output (ALT mode DP 1�4), PD 96W,
data transfer�
• Thunderbolt
TM
4 output : PD
15W, downstream�
• Thunderboltdaisychain:rstplugin
Thunderbolt input , then plug
in Thunderbolt output for signal
output�(Refer to chapter: Daisy-chain
function)
4
USBC upstream
5
USBC downstream (15W)
6
USB downstream
7
USB downstream/USB fast charger
8
RJ45 input
9
Audio (In/Out): audio out /
microphone in combo jack
10
Kensington anti-theft lock
Connect to PC
1. Connect the power cord to the back
of the display rmly.
2. Turn o your computer and unplug
its power cable.
3. Connect the monitor signal cable to
the video connector on the back of
your computer.
4. Plug the power cord of your
computer and your monitor into a
nearby outlet.
5. Turn on your computer and monitor.
If the monitor displays an image,
installation is complete.
4
USB hub
To comply with International energy
standards, the USB hub/ports of this
monitor are disabled during Standby
and Off modes.
Connected USB devices will not work in
this state.
To permanently put the USB function
in “ON” state, please go to OSD Menu,
then select “USB standby mode”, and
switch it to “ON” state. Somehow if your
monitor reset to factory setting, ensure
to select “USB standby mode” to “ON”
state in OSD menu.
Bekijk gratis de handleiding van Philips 27E3U7903, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Philips |
| Model | 27E3U7903 |
| Categorie | Monitor |
| Taal | Nederlands |
| Grootte | 5202 MB |
