Handleiding
Je bekijkt pagina 4 van 31
2
• Do not knock or drop the
monitor during operation and/or
transportation.
• Excessive usage of the monitor
can cause eye discomfort. It’s
recommended to take shorter breaks
more often at your workstation
than longer breaks and less often.
For example, a 5-10 minute break
after 50-60-minute continuous
screen use is likely to be better than
a 15-minute break every two hours.
Prevent eye strain while using the
screen for a constant period by :
• Looking at something varying
distances after a long period of
focusing on the screen.
• Conscious Blinking while you
work.
• Gently closing and rolling your
eyes to relax.
• Reposition your screen to the ap-
propriate height and angle.
• Adjust the brightness and con-
trast to an appropriate level.
• Adjust the environment light-
ing similar to that of your screen
brightness. Avoid uorescent
lighting and surfaces that don’t
reect too much light.
• Seeing a doctor if your symptoms
worsen.
Maintenance
• To protect your monitor from
possible damage, do not put
excessive pressure on the LCD panel.
When moving your monitor, grasp
the frame to lift; do not lift the
monitor by placing your hand or
fingers on the LCD panel.
• Oil-based cleaning solutions may
damage the plastic parts and void
the warranty.
• Unplug the monitor if you are not
going to use it for an extensive period.
• Unplug the monitor if you need to
clean it with a slightly damp cloth. The
screen may be wiped with a dry cloth
when the power is off. However, never
use organic solvents, such as alcohol
or ammonia-based liquids.
• To avoid the risk of shock or
permanent damage to the set, do
not expose the monitor to dust, rain,
water, or excessive moisture.
• If your monitor gets wet, wipe it with
a dry cloth as soon as possible.
• If a foreign substance or water gets in
your monitor, please turn the power
off immediately and disconnect the
power cord. Then, if damaged, send it
to the maintenance center.
• Do not store or use the monitor in
locations exposed to heat, direct
sunlight, or extreme cold.
• To maintain the best performance of
your monitor and use it for a longer
lifetime, please use the monitor in a
location that falls within the following
temperature and humidity ranges:
• Temperature: 0°C~40°C 32°F~104°F
• Humidity: 20%~80% RH
Important information for Burn-in/Ghost
image
• Always activate a moving screen
saver program when you leave your
monitor unattended. Always activate
a periodic screen refresh application if
your monitor will display unchanging
static content. Uninterrupted display
of still or static images over an
extended period may cause “burn-
in”, also known as “after-imaging” or
“ghost imaging”, on your screen.
Bekijk gratis de handleiding van Philips 27B2N3500J, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Philips |
| Model | 27B2N3500J |
| Categorie | Monitor |
| Taal | Nederlands |
| Grootte | 3288 MB |
