Handleiding
Je bekijkt pagina 29 van 31
2727
Q3: What are the .inf and .icm les?
How do I install the drivers (.inf and
.icm)?
Ans.: These are the driver les for your
monitor. Your computer may ask
you for monitor drivers (.inf and
.icm les) when you rst install your
monitor. Follow the instructions
in your user manual, and monitor
drivers (.inf and .icm les) will be
installed automatically.
Q4: How do I adjust the resolution?
Ans.: Your video card/graphic driver
and display together determine
the available resolutions. You can
select the desired resolution under
Windows
®
Control Panel with the
"Display properties".
Q5: What if I get lost when I am making
display adjustments via OSD?
Ans.: Simply press button, then select
'Setup' > 'Reset' to recall all the
original factory settings.
Q6: Is the LCD screen resistant to
scratches?
Ans.: In general it is recommended that
the panel surface is not subjected
to excessive shocks and is protected
from sharp or blunt objects. When
handling the display, make sure
that there is no pressure or force
applied to the panel surface side.
This may aect your warranty
conditions.
Q7: How should I clean the LCD surface?
Ans.: For normal cleaning, use a clean,
soft cloth. For extensive cleaning,
please use isopropyl alcohol. Do
not use other solvents such as ethyl
alcohol, ethanol, acetone, hexane,
etc.
Q8: Can I change the color setting of
my display?
Ans.: Yes, you can change your color
setting through OSD control as per
the following procedures.
• Press "OK" to show the OSD (On
Screen Display) menu
• Press "Down Arrow" to select the
option "Color" then press "OK" to
enter the color setting, there are three
settings as below.
1. Color Temperature: The settings are
as follows. Native, 5000K, 6500K,
7500K, 8200K, 9300K, and 11500K.
With settings in the 5000K range
the panel appears "warm, with
a red-white color tone", while a
11500K temperature yields "cool,
blue-white toning".
2. sRGB: This is a standard setting for
ensuring the correct exchange of
colors between dierent devices
(e.g. digital cameras, monitors,
printers, scanners, etc).
3. User Dene: The user can choose
his/her preferred color setting
by adjusting red, green, and blue
colors.
Note
A measurement of the color of light
radiated by an object while it is being
heated. This measurement is expressed in
terms of absolute scale, (degrees Kelvin).
Lower Kevin temperatures such as 2004K
are red; higher temperatures such as
9300K are blue. The neutral temperature
is white, at 6504K.
Bekijk gratis de handleiding van Philips 24B2N3200J, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Philips |
| Model | 24B2N3200J |
| Categorie | Monitor |
| Taal | Nederlands |
| Grootte | 3392 MB |
