Handleiding
Je bekijkt pagina 11 van 30
9
4
Overclock Your Monitor
The Overclock function increases the
native refresh rate, however, it does
have some associated risks along with it.
Please follow the instructions below to
activate the Overclock feature on your
monitor:
1. First, check your PC’s graphics card
and make sure it is capable of
achieving the maximum resolution
and refresh rate of this monitor.
2. If needed, install the latest version of
graphics card driver.
3. Ensure the Overclock signal port is
available (Please refer to the chapter
Resolution & Preset Modes in the
dedicated user manual).
4. Modify the refresh rate in the On
Screen Display (OSD) settings.
To enable the Overclock feature, you
will need to go to OSD menu > Game
Setting > Overclock.
Note
Please note that the default setting
for Overclock is o as it can cause
irreversible damage to your monitor.
If the screen is displayed abnormally
after rebooting, please switch o
the Overclock setting located in the
monitor's OSD menu. Alternatively, you
can unplug the power cable. Then, press
and hold the left button of the menu
toggle on the monitor while plugging
the power cable back in. Keep holding
the button until the screen turns on.
This will turn o the Overclock function,
and the monitor will return to its default
refresh rate.
5
Physical Function
Tilt
20°
-5°
Warning
• To avoid potential screen damage,
such as panel peeling, ensure that
the monitor does not tilt downward
by more than -5 degrees.
• Do not press the screen while
adjusting the angle of the monitor.
Grasp only the bezel.
Bekijk gratis de handleiding van Philips 22E1N1100, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Philips |
| Model | 22E1N1100 |
| Categorie | Monitor |
| Taal | Nederlands |
| Grootte | 3070 MB |
