Handleiding
Je bekijkt pagina 14 van 39
12
2. Setting up the monitor
Note
Please note that the default setting
for Overclock is off as it can cause
irreversible damage to your monitor.
If the screen is displayed abnormally
after rebooting, please switch off
the Overclock setting located in the
monitor's OSD menu. Alternatively, you
can unplug the power cable. Then, press
and hold the left button of the menu
toggle on the monitor while plugging
the power cable back in. Keep holding
the button until the screen turns on.
This will turn off the Overclock function,
and the monitor will return to its default
refresh rate.
5
Physical Function
Tilt
20
-5
Warning
• To avoid potential screen damage,
such as panel peeling, ensure that
the monitor does not tilt downward
by more than -5 degrees.
• Do not press the screen while
adjusting the angle of the monitor.
Grasp only the bezel.
2.3 Remove the Base Assembly
for VESA Mounting
Before you start disassembling the
monitor base, please follow the
instructions below to avoid any possible
damage or injury.
1. Place the monitor face down on a
smooth surface. Pay attention not
to scratch or damage the screen.
2. Press the release button to detach
the base stand away from the base
column.
2
1
3. Press the release button to detach
the base column.
3
Bekijk gratis de handleiding van Philips 221V8LB3, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Philips |
| Model | 221V8LB3 |
| Categorie | Monitor |
| Taal | Nederlands |
| Grootte | 4024 MB |
