Philco PLDSI 149 A King handleiding
Handleiding
Je bekijkt pagina 10 van 36
Copyright © 2023, Fast ČR, a. s. Revision 11/2023
EN - 8
G Installation
Installation area
！
Warning!
t 4UBCJMJUZJTJNQPSUBOUUPQSFWFOUUIFQSPEVDUGSPNXBOEFSJOH
t .BLFTVSFUIBUUIFQSPEVDUTIPVMEOPUTUBOEPOUIFQPXFSDPSE
Before installing the machine, the location characterized follows shall be selected:
1. Rigid, dry, and level surface
2. Avoid direct sunlight
3. Sucient ventilation
4. Room temperature is above 0 °C
5. Keep far away from the heat resources such as coal or gas.
Unpacking the washing machine
！
Warning!
t 1BDLBHJOHNBUFSJBMFH'JMNT4UZSPGPBNDBOCFEBOHFSPVTGPSDIJMESFO
t 5IFSFJTBSJTLPGTVòPDBUJPO,FFQBMMQBDLBHJOHXFMMBXBZGSPNDIJMESFO
1. Remove the cardboard box and styrofoam packing.
2. Lift the washer dryer and remove the base packing. Make sure the small triangle
foam is removed with the bottom one together. If not, lay the unit down with side
surface, then remove the small foam from the unit bottom manually.
3. Remove the tape securing the power supply cord and drain hose.
4. Remove the inlet hose from the drum.
Remove transport bolts
！
Warning!
t :PVNVTUSFNPWFUIFUSBOTQPSUCPMUTGSPNUIFCBDLTJEFCFGPSFVTJOHUIFQSPEVDU
t :PVMMOFFEUIFUSBOTQPSUCPMUTBHBJOJGZPVNPWFUIFQSPEVDUTPNBLFTVSFZPVLFFQUIFNJOBTBGFQMBDF
Please take the following steps to remove the bolts:
1. Loosen 4 bolts with spanner and then remove them.
2. Stop the holes with transport hole plugs.
3. Keep the transport bolts properly for future use.
w
w
W> 20mm
Bekijk gratis de handleiding van Philco PLDSI 149 A King, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Philco |
| Model | PLDSI 149 A King |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 2654 MB |
