Philco PLDI 148 ASTW handleiding
Handleiding
Je bekijkt pagina 44 van 53
Copyright © 2024, Fast ČR, a. s. Revision 06/2024
EN - 42
FAULT POSSIBLE CAUSE TROUBLESHOOTING
Excessive foam is formed in
the detergent drawer.
Excessive amount of detergent
used.
Press the Start/Pause button. To stop
the foam, dilute one tablespoon of
softener into 1/2 litre of water and
pour into the detergent drawer. Press
the Start/Pause button after 5-10 mins.
Wrong detergent used.
Only use detergents produced for
automatic Washing Machines.
Unsatisfactory washing
result.
Your washing is too dirty for the
programme selected.
Use the information in the programme
tables to select the most appropriate
programme.
Amount of detergent used
insucient.
Use the amount of detergent as
instructed on the packaging.
There is too much laundry in
your machine.
Check that the maximum capacity for
the selected programme has not been
exceeded.
Hard water.
Increase the amount of detergent
GPMMPXJOHUIFNBOVGBDUVSFST
instructions.
Your laundry is too tightly
packed together in the drum.
Check that your laundry is spread out.
As soon as the machine is
loaded with water, water
discharges.
The end of water drain hose is
too low for the machine.
Check that the drain hose is at a
suitable height. (**) .
No water appears in the
drum during washing.
No fault. Water is in the unseen
part of the drum.
. . . . . . . . . . . . . . . . . . . . .
Laundry has
detergent residue
Non-dissolving particles of some
detergents may appear on your
laundry as white spots.
Perform an extra rinse, or clean your
laundry with a brush after it dries.
Grey spots appear on the
laundry.
There is untreated oil, cream or
ointment on your laundry.
Use the amount of detergent as
instructed on the packaging in the
next wash.
The spin cycle does not take
place or takes place later
than expected.
No fault. The Unbalanced
load control system has been
activated.
The Unbalanced load control system
will try to spread your laundry. The
spinning cycle will begin once your
laundry is spread. Load the drum
evenly for the next wash.
(*) See the chapter regarding maintenance and cleaning of your machine.
(**) See the chapter regarding installation of your machine.
Bekijk gratis de handleiding van Philco PLDI 148 ASTW, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Philco |
| Model | PLDI 148 ASTW |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 4625 MB |
