Philco PLDI 138 AQTL handleiding
Handleiding
Je bekijkt pagina 28 van 36
Copyright © 2020, Fast ČR, a. s. Revision 12/2020
EN - 26
G Trouble Shooting
The start of the appliance does not work or it stops during operation.
First try to nd a solution to the problem, If not, contact the service centre.
Description Reason Solution
Washing machine
cannot start up.
Door is not closed properly.
Restart after the door is closed.
Check if the clothes is stuck.
Door can’t be opened.
Washer’s safety protection design is
working.
Disconnect the power, restart the
product.
Water leakage.
The connection between inlet pipe or
outlet hose is not tight.
Check and fasten water pipes.
Clean up outlet hose.
Detergent residues in
the box.
Detergent is dampened or
agglomerated.
Clean and wipe the detergent box.
Indicator or display
does not light.
Disconnect the power.
PC board or harness has connection
problem.
Check if the power is shut down and the
power plug is connected correctly.
Abnormal noise.
Check if the xing (bolts) have been
removed.
Check it’s installed on a solid and level
oor.
LED display models:
Description Reason Solution
Door is not closed properly.
Restart after the door is closed.
Check if the clothes is stuck.
Water injecting problem while
washing.
Check if the water pressure is too low.
Straighten the water pipe.
Check if the inlet valve lter is blocked.
Overtime water draining. Check if the drain hose is blocked.
Water overow. Restart the washer.
Others
Please try again rst, call up service line
if there are still troubles.
Note!
t "GUFSUIFDIFDLBDUJWBUFUIFBQQMJBODF*GUIFQSPCMFNPDDVSTPSUIFEJTQMBZTIPXTPUIFSBMBSNDPEFTBHBJO
contact the service.
Bekijk gratis de handleiding van Philco PLDI 138 AQTL, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Philco |
| Model | PLDI 138 AQTL |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 3649 MB |