Philco PLD 147 EG handleiding
Handleiding
Je bekijkt pagina 10 van 44
Copyright © 2020, Fast ČR, a. s. Revision 07/2022
EN - 8
p Installation
Installation area
！
Warning!
•Stabilityisimportanttopreventtheproductfromwandering!
Make sure the machine is standing leveled and stable.
•Makesurethattheproductdoesnotstandontothepowercord.
•Makesuretomaintaintheminimumdistancesfromthewallsasshownin
the picture.
Before installing the machine, the location characterized as follows shall be
selected:
1. Rigid, dry, and level surface.
2. Avoid direct sunlight.
3. Sucient ventilation.
4. Room temperature is above 0°C.
5. Keep far away from the heat sources such as coal or gas burning appliances.
Unpacking the washing machine
！
Warning!
•Packagingmaterial(e.g.Films,Styrofoam)canbedangerousforchildren.
•Thereisariskofsuocation!Keepallpackagingwellawayfromchildren.
1. Remove the cardboard box and styrofoam packing.
2. Lift the washing machine and remove the base packaging.Make sure the
small triangle foam (a) is removed with the bottom packaging together. If
not, lay the unit down on the side surface and remove it manually.
3. Remove the tape securing the power supply cord and drain hose.
4. Remove the inlet hose from the drum.
Remove transport bolts
！
Warning!
•Youmustremovethetransportboltsfromthebacksidebeforeusingtheproduct.
Loosen the 4 transport bolts
with a spanner.
Remove the bolts including
the rubber parts and keep
them for future use.
Close the holes using the
cover caps.
w
w
W> 20mm
a
Bekijk gratis de handleiding van Philco PLD 147 EG, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Philco |
| Model | PLD 147 EG |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 2839 MB |
