Handleiding
Je bekijkt pagina 12 van 64
Copyright © 2024, Fast ČR, a. s. Revision 11/2024
10
EN
PART 3: CARE AND CLEANING
1. Rotary switch knob – “0” means Power OFF; “Program” means standby mode, you can use the
program function (Pulse, Ice crush and Juice); “0” to “10” is stepless speed control.
2. Speed regulator, “0” means Stop, “Program” means standby mode, “1” means minimum speed,
“10” means maximum speed. When turn the knob to “1” position, then product start working at
minimum speed. You can control the speed by rotating the knob.
3. Program function button – 3 dierent operating mode: “Pulse”, “Ice”, “Juice”. When the knob is turned
to “Program “keep pressing “Pulse” function switch, the product is working by maximum speed,
If the product is working under “Ice” mode, press the “Ice” button, the product will stop working
and turn into standby mode. If press other function button, the product will turn into the relevant
function mode. When product is working under “Ice”, “Juice”. mode, the speed regulator and pulse
switch will not work.
PART 4: KEY POINT INSTRUCTION
1. Blending jar – 2 liters capacity, SUS 420 stainless steel blade, food contact grade material, BPA free.
2. Pushing rod – push the food close to the blade, make sure the good performance. Caution: the
pushing rod is only use for mixing during blending food, not for other purpose. Before use the
pushing rod, make sure the cover is in position.
3. Speed – 33000 rpm high speed, good performance assurance.
4. Voice – less than 85 dB (1 meter form the product, background voice less than 65 dB).
5. Overheat protection – If the product overload working for long time, the thermal limiter will stop
the product to protect the motor not overheat. If thermal limiter operate, please reduce the load
of blending jar, and wait for almost 30 min to let the motor cool down, and then use the product
again. If LED light still ashing, but product still not work, wait more 10 to 20 min. Overcurrent
protection – If blending very hard food (or very big food) incorrectly, the blade may block, the
current limiter will stop the product. If current limiter operate, please switch o the product and
remove the very hard or very big food, and then use the product again.
Bekijk gratis de handleiding van Philco PHTB 2401, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Philco |
| Model | PHTB 2401 |
| Categorie | Blender |
| Taal | Nederlands |
| Grootte | 4734 MB |
