Philco PHD 641 EPSB handleiding

Fornuis

Philco

33 pagina's

PDF beschikbaar

Handleiding

EN - 9

3.3 How to use

3.3.1 Start cooking

Touch the ON/OFF control for three seconds. After power on,

the buzzer beeps once, all displays show “–” or “– –”, indicating

that the induction hob has entered the state of standby mode.

Place a suitable pan on the cooking zone that you wish to use.

• Makesurethebottomofthepanandthesurfaceofthe

cooking zone are clean and dry.

Touching the heating zone selection control, and a indicator

next to the key will ash

Select a heat setting by touching the slider control

• Ifyoudon’tchooseaheatsettingwithin1minute,the

Induction hob will automatically switch o. You will need to

start again at step 1.

• Youcanmodifytheheatsettingatanytimeduringcooking.

If the display ashes alternately with the heat setting

This means that:

• youhavenotplacedapanonthecorrectcookingzoneor,

• thepanyou’reusingisnotsuitableforinductioncookingor,

• thepanistoosmallornotproperlycenteredonthecookingzone.

No heating takes place unless there is a suitable pan on the cooking zone.

The display “ ” will automatically disappear after 1 minute if no suitable pan is placed on it.

Bekijk gratis de handleiding van Philco PHD 641 EPSB, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Merk	Philco
Model	PHD 641 EPSB
Categorie	Fornuis
Taal	Nederlands
Grootte	2864 MB

Gerelateerde producten van Philco (Fornuis)

Handleiding bekijken

Philco PHD 640 EP

Fornuis - handleiding

Handleiding bekijken

Philco PHD 640 EPSB

Fornuis - handleiding

Handleiding bekijken

Philco PHS 604 DC

Fornuis - handleiding

Handleiding bekijken

Philco PHD 64 TB

Fornuis - handleiding

Bekijk alle producten Philco Fornuis

Andere merken in Fornuis

Bekijk alle merken voor Fornuis