Philco PHD 640 EP handleiding

Handleiding

1234567891011121314151617181920212223242526272829303132/ 32

Afdrukken

Je bekijkt pagina 11 van 32

Copyright © 2024, Fast ČR, a. s. Revision 04/2024

EN - 9

3.3 How to use

3.3.1 Start cooking

Touch the ON/OFF control for three seconds. After power on,

the buzzer beeps once, all displays show “–” or “– –”, indicating

that the induction hob has entered the state of standby mode.

Place a suitable pan on the cooking zone that you wish to use.

• Makesurethebottomofthepanandthesurfaceofthe

cooking zone are clean and dry.

Touching the heating zone selection control ,and a indicator

next to the key will ash

Select a heat setting by touching the “-” or “+” control.

• Ifyoudon’tchooseaheatsettingwithin1minute,the

Induction hob will automatically switch o. You will need to

start again at step 1.

• Youcanmodifytheheatsettingatanytimeduringcooking.

If the display ashes alternately with the heat setting

This means that:

• youhavenotplacedapanonthecorrectcookingzoneor,

• thepanyou’reusingisnotsuitableforinductioncookingor,

• thepanistoosmallornotproperlycenteredonthecookingzone.

No heating takes place unless there is a suitable pan on the cooking zone.

The display “ ” will automatically disappear after 1 minute if no suitable pan is placed on it.

1234567891011121314151617181920212223242526272829303132/ 32

Bekijk gratis de handleiding van Philco PHD 640 EP, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Andere merken in Fornuis