Handleiding
Je bekijkt pagina 13 van 51
3. When the time is set, it will begin to count down immediately. The display will
show the remaining time，and the dot next to timer indicator will keep on flashing.
4. Buzzer will bips and the timer indicator will turn off when the setting time
finished.
Setting the timer to switch off zones
1. Selecting the relevant cooking zone by touching the power slider
regulating key to set the power lever you required，the dot next to power
level indicator will flash for 5 seconds.
2.
Before the dot stops flashing, touch the timer control key(H)
or you
can realize the setting of timing from 1 to 99 minutes.
Hint: Touch the “-“ or “+” control of the timer once will decrease or increase by 1 minute.
Touch and hold the ”-“ or “+”control of the timer will decrease or increase by 10 minutes.
3. When the time is set, it will begin to count down immediately. The timer
setting indicator will show the remaining time and the timer indicator will
flash for 5 seconds.
4. After that, if the indicator will keep on flashing meaning that the timer
setting indicator shows the relevant zone remaining time until the timer
expires; or else the indicator will keep on lighting until the timer
expires.
13
EN
Bekijk gratis de handleiding van Philco PH2728IC, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Philco |
| Model | PH2728IC |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 7137 MB |
