Handleiding
Je bekijkt pagina 10 van 51
10
N
Induction HobUsing your
To start cooking
1. Touch the ON/OFF key（B）.
After power on, the buzzer beeps once, all displays
show “ – “, indicating that the induction
hob has entered the state of standby mode.
2. Place a suitable pan on the cooking zone that
you wish to use.
• Make sure the bottom of the pan and the surface
Of the cooking zone are clean and dry.
3. According to the heating zone where the pan is placed, select a relevant zone
select key by pressing“
”key (A).The symbol 0. selected will stay fully it.
4.
Adjust heat setting by touching the regulating
key(F) control.
• If you don’t choose a heat setting within 1 minute, the Induction hob will
automatically switch off. You will need to start again at step 1.
• You can modify the heat setting at any time during cooking.
alternately with the heat setting
If the display flashes
This means that:
1. You have not placed a pan on the correct cooking zone or,
2. Pan is using is not suitable for induction cooking or,
3. Pan is too small or not properly centred on the cooking zone.
No heating takes place unless there is a suitable pan on the cooking
zone.The display will automatically turn off after 1 minutes if no
suitable pan is placed on
it.
; �
Bekijk gratis de handleiding van Philco PH2728IC, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Philco |
| Model | PH2728IC |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 7137 MB |
