Philco PDI 1468 BTX handleiding
Handleiding
Je bekijkt pagina 9 van 36
Copyright © 2020, Fast ČR, a. s. Revision 10/2022
EN - 7
WARNING!
Run water through the new hose before connecting.
WARNING!
Connect the hose directly to the water inlet tap. The pressure supplied by the tap should be a minimum
of 0.03 MPa and a maximum of 1 MPa. If the pressure exceeds 1 MPa, a pressure relief valve must be tted
between the connection.
WARNING!
After the connections are made, turn the tap on fully and check for water leaks. Always turn o the water
inlet tap after a wash program has nished.
An Aquastop water spout is available with some models. Do not damage it or allow it to become
kinked or twisted.
Drain Hose
Connect the water drain hose directly to water drain hole or to the sink outlet
spigot. This connection should be minimum 50 cm and maximum 110 cm
from or plane.
IMPORTANT!
Items will not wash properly if a drain hose longer than 4 m is used.
Bekijk gratis de handleiding van Philco PDI 1468 BTX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Philco |
| Model | PDI 1468 BTX |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 5403 MB |
