Philco PDI 1468 BTX handleiding
Handleiding
Je bekijkt pagina 29 van 36
Copyright © 2020, Fast ČR, a. s. Revision 10/2022
EN - 27
PART 9: TROUBLESHOOTING
FAULT POSSIBLE CAUSE TROUBLESHOOTING
Whitish stains remains on
dishes.
Not enough detergent used.
Use the correct amount of detergent,
as instructed in the programme table.
Rinse aid dosage and/or water
softener setting set too low.
Increase rinse aid and/or water
softener level.
High water hardness level.
Increase water softerner level and add
salt.
Salt compartment cap not closed
properly.
Check that the salt compartment cap
is closed properly.
Dishes do not dry.
Drying option is not selected.
Select a programme with a drying
option.
Rinse aid dosage set too low. Increase rinse aid dosage setting.
Rust stains form on the
dishes.
Stainless-steel quality of the
dishes is insucient.
Use only dishwasher-proof sets.
High level of salt in wash water.
Adjust the water hardness level using
water hardness table.
Salt compartment cap not closed
properly.
Check that the salt compartment cap
is closed properly.
Too much salt spilled in the
Dishwasher while lling it with
salt.
Use funnel while lling salt to the
compartment to avoid spillage.
A poor mains grounding.
Consult a qualied electrician
immediately.
Detergent remains in the
detergent compartment.
Detergent was added when the
detergent compartment was wet.
Make sure detergent compartment is
dry before use.
Bekijk gratis de handleiding van Philco PDI 1468 BTX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Philco |
| Model | PDI 1468 BTX |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 5403 MB |
