Philco PDI 1468 BTX handleiding

36 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 27 van 36
Copyright © 2020, Fast ČR, a. s. Revision 10/2022
EN - 25
PART 8: CLEANING AND MAINTENANCE
Cleaning your dishwasher is important to maintain
the machine’s service life Make sure that the water
softening setting (If available) is done correctly and
correct amount of detergent is used to prevent
limescale accumulation. Rell the salt compartment
when the salt sensor light comes on.
Oil and limescale may build up in your Dishwasher
over time. If this occurs:
t 'JMMUIFEFUFSHFOUDPNQBSUNFOUCVUEPOPUMPBE
any dishes. Select a programme which runs
at high temperature and run the Dishwasher
empty. If this does not clean your Dishwasher
suciently, use a cleaning agent designed for
use with dishwashers.
t 5PFYUFOEUIFMJGFPGZPVSEJTIXBTIFSDMFBOUIF
appliance regularly on each month
t 8JQFUIFEPPSTFBMTSFHVMBSMZXJUIBEBNQDMPUI
to remove any accumulated residue or foreign
objects.
Filters
Clean the lters and spray arms at least once a week.
If any food waste remains or foreign objects on the
coarse and ne lters, remove them and clean them
thoroughly with water.
a) Micro Filter b) Coarse Filter
c) Metal Filter
D
F
E
To remove and clean the lter combination, turn it
counter clockwise and remove it by lifting it upwards
(1). Pull the coarse lter out of the micro lter (2).
Then pull and remove the metal lter (3). Rinse the
lter with lots of water until it is free of residue.
Reassemble the lters. Replace the lter insert, and
rotate it clockwise (4).
t /FWFSVTFZPVSEJTIXBTIFSXJUIPVUBöMUFS
t *ODPSSFDUöUUJOHPGUIFöMUFSXJMMSFEVDFUIF
washing eectiveness.
t $MFBOöMUFSTBSFOFDFTTBSZGPSQSPQFSSVOOJOHPG
the machine.
Spray arms
Make sure that the spray holes are not clogged and
that no food waste or foreign object is stuck to the
spray arms. If there is any clogging,remove the spray
arms and clean them under water. To remove the
upper spray arm undo the nut holding it in position
by turning it clockwise and pulling it downwards.
Make sure that the nut is properly tightened when
retting the upper spray arm.

Bekijk gratis de handleiding van Philco PDI 1468 BTX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkPhilco
ModelPDI 1468 BTX
CategorieVaatwasser
TaalNederlands
Grootte5403 MB