Philco PDI 1468 BTX handleiding
Handleiding
Je bekijkt pagina 14 van 36
Copyright © 2020, Fast ČR, a. s. Revision 10/2022
EN - 12
Detergent usage
Only use detergents specically designed for
domestic dishwashers. Keep your detergents in cool,
dry places out of reach of children. Add the proper
detergent for the selected program to ensure the
best performance. The amount of detergent needed
depends on the cycle, load size, and soil level of
dishes. Do not ll detergent into the detergent
compartment more than required; otherwise you
can see whitish streaks or bluish layers on glass and
dishes and may cause glass corrosion. Continued use
of too much detergent may cause machine damage.
Using little detergent can result in poor cleaning and
you can see whitish streaksin hard water. See the
detergent manufacturer’s instructions for a further
information.
Filling the detergent
Push the latch to open the dispenser and pour in the
detergent.
Close the lid and press it until it locks in place.
The dispenser should be relled just before the
start of each programme. If the dishes are heavily
soiled, place additional detergent in the pre-wash
detergent chamber.
'(7(5*(17
Using combined detergents
These products should be used according to the
manufacturer’s instructions.
Never put combined detergents into the interior
section or the cutlery basket.
Combined detergents contain not only the
detergent but also rinse-aid, salt replacement
substances and additional components depending
on the combination.
We recommend you do not use combined
detergents in short programmes.
Please use powder detergents in such programmes.
If you encounter problems when using combined
detergents, please contact the detergent
manufacturer.
When you stop using combined detergents, make
sure that water hardness and rinse aid settings are
set to the correct level.
Rinse-aid usage
The rinse aid helps to dry the dishes without streaks
and stains. Rinse-aid is required for stain-free utensils
and clear glasses. The rinse aid is automatically
released during the hot rinse phase. If rinse aid
dosage setting set too low, whitish stains remains on
dishes and dishes do not dry and washed clean.
If rinse aid dosage setting set too height, you can see
bluish layers on glass and dishes.
Filling the rinse-aid and setting
To ll the rinse aid compartment, open the rinse-aid
compartment cap. Fill the compartment with rinse
aid to the MAX level and then close the cap. Be
careful not to overll the rinse aid compartment and
wipe up any spills.
In order to change the rinse aid level, follow the
below steps before turning on the machine:
t 5VSOPOUIFNBDIJOFCZQSFTTJOHUIF0O0ò
button.
t 1SFTTUIF1SPHSBNNFCVUUPOGPSBUMFBTU
seconds immediately after the machine is turned
on.
t 3FMFBTFUIF1SPHSBNNFCVUUPOXIFOiS"wJT
shown. Rinse aid level setting follows water
hardness level setting. Next, the last setting level
is displayed.
t 4FUUIFMFWFMCZQVTIJOHUIFQSPHSBNNFCVUUPO
t 4XJUDIPòUIFNBDIJOFUPTBWFUIFTFUUJOH
t 5IFGBDUPSZTFUUJOHJTiw
Bekijk gratis de handleiding van Philco PDI 1468 BTX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Philco |
| Model | PDI 1468 BTX |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 5403 MB |
