Philco PDI 1468 BTX handleiding

36 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 12 van 36
Copyright © 2020, Fast ČR, a. s. Revision 10/2022
EN - 10
PART 4: BEFORE USING THE APPLIANCE
Preparing your dishwasher for rst
use
t .BLFTVSFUIFFMFDUSJDJUZBOETVQQMZXBUFS
specications match the values indicated in the
installation instructions for the machine.
t 3FNPWFBMMQBDLBHJOHNBUFSJBMJOTJEFUIF
machine.
t 4FUUIFXBUFSTPGUFOFSMFWFM
t 'JMMUIFSJOTFBJEDPNQBSUNFOU
Salt usage (IF AVAILABLE)
For a good washing function, the dishwasher needs
soft, i.e. less calcareous water. Otherwise, White lime
residues will remain on the dishes and the interior
equipment. This will negatively aect your machines
washing, drying and shining performance. When
water ows through the softener system, the ions
forming the hardness are removed from the water
and the water reaches the softness required to
obtain the best washing result. Depending on the
level of hardness of the inowing water, these ions
that harden the water accumulate rapidly inside the
softener system. Therefore, the softener system has
to be refreshed so that it operates with the same
performance also during the next wash. For this
purpose, dishwasher salt is used.
Machine can only be used by special dishwasher salt
to soften the water. Do not use any small grained
or powdered type of salts which can easily soluble.
Using any other type of salt can damage your
machine.
Fill the salt (IF AVAILABLE)
To add softener salt, open the salt compartment cap
by turning it counter clockwise. (1) (2) At rst use, ll
the compartment with 1 kg salt and water (3) until
it is almost overowing. If available, using a funnel
(4) will make lling easier. Replace the cap and close
it. After every 20-30 Cycles add salt into your mach
until it lls up (approx. 1 kg.
6$/7
Only add water to the salt compartment on rst
use.
Use softener salt specically produced for use in
dishwashers.
When you start your dishwasher, the salt
compartment is lled with water, therefore put the
softener salt in prior to starting your machine.
If the softener salt has overowed and you do not
start the machine immediately, run a short washing
program to protect your machine against corrosion.

Bekijk gratis de handleiding van Philco PDI 1468 BTX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkPhilco
ModelPDI 1468 BTX
CategorieVaatwasser
TaalNederlands
Grootte5403 MB