Philco PD 1046 ETX handleiding
Handleiding
Je bekijkt pagina 12 van 36
Copyright © 2020, Fast ČR, a. s. Revision 10/2022
EN - 10
PART 4: BEFORE USING THE APPLIANCE
Preparing your dishwasher for rst
use
t .BLFTVSFUIFFMFDUSJDJUZBOETVQQMZXBUFS
specications match the values indicated in the
installation instructions for the machine.
t 3FNPWFBMMQBDLBHJOHNBUFSJBMJOTJEFUIF
machine.
t 4FUUIFXBUFSTPGUFOFSMFWFM
t 'JMMUIFSJOTFBJEDPNQBSUNFOU
Salt usage
For a good washing function, the dishwasher needs
soft, i.e. less calcareous water. Otherwise, White lime
residues will remain on the dishes and the interior
equipment. This will negatively aect your machine’s
washing, drying and shining performance. When
water ows through the softener system, the ions
forming the hardness are removed from the water
and the water reaches the softness required to
obtain the best washing result. Depending on the
level of hardness of the inowing water, these ions
that harden the water accumulate rapidly inside the
softener system. Therefore, the softener system has
to be refreshed so that it operates with the same
performance also during the next wash. For this
purpose, dishwasher salt is used.
Machine can only be used by special dishwasher salt
to soften the water. Do not use any small grained
or powdered type of salts which can easily soluble.
Using any other type of salt can damage your
machine.
Fill the salt
When you want to add water softening salt,
open the salt compartment cover by rotating it
anticlockwise. (1) (2) When using the appliance for
the rst time, ll the compartment with water and 1
kg of salt (3); the compartment should be full so that
it almost overows. If possible, using funnel (4) will
make lling easier.
Close the cover after the lling. (5) Launch a short
programme. (6) Rell the salt container to make it
full again. (7) Launch a short programme. Now the
dishwasher is ready to be used.
When salt is running out, an indicator will light up
on the display. In this case rell the salt and always
launch a short programme afterwards, this will
prevent corrosion from forming in the dishwasher.
6$/7
!!!
The salt compartment should only be lled with
water when the appliance is used for the rst
time.
Only salt intended for use in dishwashers should
be used.
When salt overows and gets out of the salt
container, launch a short washing programme
to protect the dishwasher from corrosion.
Otherwise there is a risk of corrosion forming in
the dishwasher.
Bekijk gratis de handleiding van Philco PD 1046 ETX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Philco |
| Model | PD 1046 ETX |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 4286 MB |
