Pfaff passport 2.0 handleiding
Handleiding
Je bekijkt pagina 6 van 32
6
Presser feet
Important: Make sure that the IDT™ system is disengaged when using presser foot 2A, 5B.
Standard presser foot 0A with IDT™ system (shown as in the
display, attached on the machine upon delivery)
This foot is used mainly for straight stitching and zigzag stitching with a
stitch length longer than 1.0 mm.
Fancy stitch foot 1A with IDT™ system (shown as in the display)
7KLVIRRWLVXVHGIRUGHFRUDWLYHVWLWFKHV7KHJURRYHRQWKHXQGHUVLGHRIWKH
IRRWLVGHVLJQHGWRÁRZVPRRWKO\RYHUWKHVWLWFKHV
Fancy stitch foot 2A (shown as in the display)
:KHQVHZLQJGHFRUDWLYHVWLWFKHVRUVKRUW]LJ]DJVWLWFKHVDQGRWKHUXWLOLW\
VWLWFKHVZLWKOHVVWKDQPPVWLWFKOHQJWKXVHWKLVIRRW7KHJURRYHRQWKH
XQGHUVLGHRIWKHIRRWLVGHVLJQHGWRÁRZVPRRWKO\RYHUWKHVWLWFKHV
Blindhem foot 3 with IDT™ system (shown as in the display)
This foot is used for blindhem stitches. The toe on the foot guides the
fabric. The red guide on the foot is designed to ride along the fold of the
hem edge.
Zipper foot 4 with IDT™ system
This foot can be snapped on either the right or the left of the needle,
PDNLQJLWHDV\WRVHZFORVHWRERWKVLGHVRIWKH]LSSHUWHHWK0RYHWKH
needle position to the right or left to sew closer to zipper teeth.
One step Buttonhole foot 5B (shown as in the display)
This foot has a space in the back to set the size of the buttonhole. The
PDFKLQHZLOOVHZDEXWWRQKROHWRÀWWKDWEXWWRQVL]H
Bekijk gratis de handleiding van Pfaff passport 2.0, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Pfaff |
| Model | passport 2.0 |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 9214 MB |
