Petsafe Staywell 919SGIFD handleiding
Handleiding
Je bekijkt pagina 5 van 44
5
DEITNL
ES
FR
EN
Replacement fl aps available online
b) In Glass
* It is not possible to cut holes in toughened glass or double glazed units
except at the time of manufacture. Please consult a glazier.
The cat fl ap requires a circular cut-out with a diameter of 210 mm (Fig. 4).
Not to scale - for best results you should
refer your glazier to the enclosed
cutting template.
c) In Walls
Follow the instructions for “Wood and PVC/uPVC/Metal”, by using the
enclosed cutting template. Please note that additional tools, materials and
competent DIY skills may be required.
Fitting your cat fl ap
Your PetSafe
®
cat fl ap is fi tted with the red 4-way lock
on the inside of your house.
Temporarily place the cat fl ap in the hole and position the outside cover
on the outside of the house. From the outside mark screw holes on the
door through the holes in the outside cover (Fig. 5).
Remove the cat fl ap and drill the holes with a 5 mm (
3
/
16
”) drill bit (Fig. 6).
FIG.5 FIG.6
Replace the cat fl ap in the hole and from the outside screw into place (Fig. 7).
If the screws are too long they may need to be cut down to match the
depth of your door. Using over long screws may damage the cat fl ap.
The screws should be removed from the cat fl ap before cutting. File down
to ensure there are no sharp edges.
Finally, cover the screw holes with the blanking plugs on the outside
frame to ensure a neat fi nish (Fig. 7).
210mm
FIG.4
Glass windows & doors, single and double glazed*
Fits brick walls
Bekijk gratis de handleiding van Petsafe Staywell 919SGIFD, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Petsafe |
| Model | Staywell 919SGIFD |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5784 MB |
