Perfect Aire 3PORT10000A handleiding
Handleiding
Je bekijkt pagina 11 van 24
11
PRODUCT INSTALLATION LOCATION
YOUR INSTALLATION LOCATION SHOULD
MEET THE FOLLOWING REQUIREMENTS:
• Make sure that you install your unit on an even
surface to minimize noise and vibration.
• The unit must be installed near a grounded
plug, and the Collection Tray Drain (found on
the back of the unit) must be accessible.
• DO NOT cover the Intakes, outlets or remote
signal receptor of the unit, as this could cause
damage to the unit.
CLEARANCE REQUIRED
FOR PROPER AIRFLOW
The unit should be positioned at least 12" (30 cm)
away from the nearest wall to ensure proper air
conditioning. The air outlet must have a clearance
of at least 19.7" (50 cm) from any obstacles.
Failure to install the unit according to the instructions
in the user manual will void the warranty.
(Continued)
INSTALLATION INSTRUCTIONS
HOW TO PURCHASE A
MOBILE TYPE AIR CONDITIONER.
The right air conditioner helps you cool a
room eciently. An undersized unit won't cool
adequately while one that's too large will not
remove enough humidity, leaving the air feeling
damp. To nd the proper air conditioner, determine
the square footage of the room you want to cool
by multiplying the room length by its width. You
also need to know the air conditioner's BTU (British
Thermal Unit) rating, which indicates the amount of
heat it can remove from a room. A higher number
means more cooling power for a larger room.
(Be sure you are comparing only newer models
to each other older models may appear to have
a higher capacity, but are actually the same) . Be
sure to “size up” if your portable air conditioner will
be placed in a very sunny room, in a kitchen, or in
a room with high ceilings. After you’ve found the
right cooling capacity or your room, you can look
at other features.
WHY NEWER PRODUCTS
HAVE LOWER COOLING CAPACITY
THAN OLDER MODELS.
Federal regulations require manufacturers to
calculate cooling capacity based on a specic test
procedure, which was changed just this year.
Models manufactured before 2017 were tested
under a dierent procedure and cooling capacity
is measured dierently than in prior years’ models.
So, while the BTUs may be lower, the actual
cooling capacity of the air conditioners has not
changed.
WHAT IS SACC ?
SACC is the representative value of Seasonally
Adjusted Cooling Capacity, in Btu/h, as determined
in accordance with the DOE test procedure at title
10 Code of Federal Regulations (CFR) 430, subpart
B, appendix CC and applicable sampling plans.
≥19.7"
50cm
≥19.7"
50cm
≥12" (30cm)
≥12" (30cm)
Bekijk gratis de handleiding van Perfect Aire 3PORT10000A, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Perfect Aire |
| Model | 3PORT10000A |
| Categorie | Airco |
| Taal | Nederlands |
| Grootte | 3795 MB |
