Perfect Aire 1PNC18000 handleiding

Handleiding

123456789101112131415161718192021222324/ 24

Afdrukken

Je bekijkt pagina 15 van 24

12

STEP 3:

PREPARE AND INSTALL CABINET

 :SPKLJOHZZPZMYVTJHIPUL[9LMLYIHJR[V:[LWVM

Window Mounting section.

2. Place cabinet into opening with bottom rail resting

ÄYTS`VUIV[[VTIVHYKVM^VVKLUMYHTL

3. Position cabinet to achieve proper slope for water

removal. (See Fig. 5.)

4. Secure bottom rail to wooden frame with two large

^VVKZJYL^ZJTSVUN\ZPUN[OL[^VOVSLZPU

the bottom of the channel resting on frame. (See

Fig. 6.)

Refer to Step 5 of Window Mounting section for

HZZLTIS`VMZ\WWVY[IYHJRL[Z(^VVKLUZ[YPWUHPSLK[V

[OLV\[ZPKL^HSSZOV\SKIL\ZLKPUJVUQ\UJ[PVU^P[OZPSS

Z\WWVY[HUNSLIYHJRL[Z:LL-PN

5. Screw or nail cabinet wooden frame using shims, if

MYHTLPZV]LYZPaLK[VLSPTPUH[LKPZ[VY[PVU:LL-PN

8.) Remember to maintain proper slope, as described

in Step 3.

6. Install chassis into cabinet by following all directions

in Step 9 of Window Mounting section.

OPTIONAL:*H\SRPUNHUKPUZ[HSSH[PVUVM[YPTVUPU[LYPVY

^HSSTH`ILKVUL@V\JHUI\`^VVKMYVT`V\YSVJHS

S\TILYVYOHYK^HYLZ\WWS`6U[OLV\[ZPKLJH\SR

openings around top and sides of cabinet, and all sides

of wood sleeve to the opening.

NOTE: See Fig. 11 of Window Mounting Instructions for

bottom rail seal location.

NOTE: Check that air

conditioner is tilted back

about 1-1/2 to 1-5/8

(3° to 4° downward

toward the outside). If,

after proper installation,

condensation does not

drain from the overflow

drain hole during normal

use, adjust slope.

MASONRY CONSTRUCTION

1. Cut or build a wall opening in the masonry wall

similar to the frame construction (refer to Step 2 of

;OY\;OL>HSS0UZ[HSSH[PVUMVY^HSS[OPJRULZZNYLH[LY

than 8½

2. Secure cabinet in place using masonry nails or the

right masonry anchor screws. (Another way to do this

is to build an in-between frame of 2x4’s as shown

PUZ[LWVM;OY\;OL>HSS0UZ[HSSH[PVUI\[THRLP[

double framed on either side and install between

masonry wall opening and cabinet. Frame must be

securely anchored to masonry wall opening.) This

way gives very good louver clearance on either side

of the cabinet.

3. Install a lintel to support masonry wall above

JHIPUL[,_PZ[PUNOVSLZPUJHIPUL[JHUIL\ZLKHUK

or additional holes can be drilled to fasten cabinet

at various positions. Be sure that side louver

clearance is in accordance with Step 1 of Masonry

Construction.

 0UZ[HSSL_[LYPVYJHIPUL[Z\WWVY[IYHJRL[ZHZZOV^UPU

:[LWVM;OY\;OL>HSS0UZ[HSSH[PVU*H\SRVYÅHZO

if needed to provide a weather-tight seal around top

and sides of cabinet.

5. To complete installation, apply wood trim molding

HYV\UKYVVTZPKLWYVQLJ[PVUVMJHIPUL[

56;,!(M[LYPUZ[HSSPUNTHRLZ\YL[OLHPYJVUKP[PVULYPZ

tilted 3-4° to the outside to allow water drainage and

WLYMLJ[JVVSPUNLɉJPLUJ`

FIG. 5

FIG. 7

FIG. 8

FIG. 6

3 ~ 4°

Side Louvers

1 Long Wood Screw

Sill angle bracket

Wooden Strip

Support

bracket

123456789101112131415161718192021222324/ 24

Bekijk gratis de handleiding van Perfect Aire 1PNC18000, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Gerelateerde producten van Perfect Aire (Airco)

Handleiding bekijken

Perfect Aire 2SPOT6800

Airco - handleiding

Handleiding bekijken

Perfect Aire 3PORT10000A

Airco - handleiding

Handleiding bekijken

Perfect Aire 4PASC10000

Airco - handleiding

Handleiding bekijken

Perfect Aire 4PACH12000

Airco - handleiding

Andere merken in Airco