Perfect Aire 1PHL15M handleiding
Handleiding
Je bekijkt pagina 8 van 12
8
USAGE
INSTRUCTIONS FOR USE
1. Place the product on a rm, level surface.
2. Plug the unit directly into a 120V AC electrical outlet. THE PLUG NEEDS
TO BE INSTALLED DIRECTLY INTO A WALL OUTLET, NEVER USE AN
EXTENSION CORD OR ANY TYPE OF ADAPTER. THE HEATER SHOULD
NEVER SHARE A WALL OUTLET WITH ANOTHER APPLIANCE.
3. Turn the POWER SWITCH to the “ON” position.
4. Turn the THERM OSTAT CONTROL DIAL to “LOW”.
5. For faster heat up or to increase heat output, turn the THERMOSTAT
CONTROL DIAL clockwise to the “HIGH”. The thermostat function controls
the temperature output. To decrease the heat output, turn THERMOSTAT
CONTROL DIAL counter clockwise.
6. Once the room reaches the desired temperature, slowly turn the
THERMOSTAT CONTROL DIAL counter clockwise until you hear a “click”.
This sets the heater to cycle ON/OFF to maintain the desired heating
temperature for energy eciency.
7. It will normally require approximately 15 minutes to reach operating
temperature.
NOTICE When the heat function is used for the rst time, a slight odor may be
present. This is normal and should not occur again unless the heater is not used
for an extended perios of time.
WARNING DO NOT cover heater at any time during operation, as there
is risk of FIRE if heater is covered.
Bekijk gratis de handleiding van Perfect Aire 1PHL15M, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Perfect Aire |
| Model | 1PHL15M |
| Categorie | Heater |
| Taal | Nederlands |
| Grootte | 762 MB |
