Perel LEDC27 handleiding
Handleiding
Je bekijkt pagina 5 van 29
LEDC27
V. 01 – 04/04/2016 5 ©Velleman nv
7.2 Pairing the Remote Control to Several Dimmers
One remote can also be used to control several dimmers simultaneously. To
do so:
1. Remove the power supply to the dimmer, and reapply the power
supply after 5 seconds.
2. Wait for 5 seconds, aim the remote control to the dimmer.
Simultaneously hold [on-off] and [MODE+] pressed for 5 seconds.
3. The dimmer will recognize any remote control.
7.3 Colour Sequence
To change the default output signal:
1. Remove the power supply to the dimmer, and reapply the power
supply after 5 seconds.
2. Wait for 5 seconds, aim the remote control to the dimmer.
Simultaneously hold the red and blue keys pressed for 5 seconds.
The output sequence will switch between six possible combinations.
8. Cleaning and Maintenance
This controller does not need any particular maintenance. Occasionally wipe
the controller with a damp cloth to keep it looking new. Do not use harsh
chemicals, cleaning solvents or strong detergents to clean the detector.
9. Technical Specifications
power supply .......................................................12-24 VDC
maximum load .......................................................... 3 x 2 A
PWM frequency ...................................................... ± 190 Hz
RF frequency .......................................................... 433 MHz
dimensions
RF remote ................................................. 86 x 40 x 7 mm
LED dimmer............................................... 31 x 13 x 8 mm
weight ........................................................................ 25 g
Bekijk gratis de handleiding van Perel LEDC27, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Perel |
| Model | LEDC27 |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 2619 MB |
